Double Glazing Lock Repairs
A good quality lock on your windows and doors can stop burglars from gaining access to your home. They usually don't want breaking glass or trying to squeeze through open windows.
Some double glazing owners, however, have encountered issues with their window or door lock after the installation. These problems can often be solved without the need to replace double glazing.
Broken or Faulty Locks
If your uPVC door or window lock is damaged or defective, then a locksmith can fix it. double glazing repairs can repair hinges, striker plate and locks for your double glazing. They will also be able to adjust the cylinder's position to fix any misalignment problems that may be causing the handle to not function properly.
The mechanism might be jammed if the key fits in the lock, but it will not turn or be difficult to insert. This can be caused by dirt or grime accumulating within the mechanism. If this is the case, it is possible to clean the lock and lubricate it. Use a dry lubricant like graphite or teflon and not oil, as oil can attract dirt, and cause it to stick to the inside mechanism. After lubricating the lock, you must insert the key and try to turn it. The lubricant will work through the mechanism and the lock should be able turn with ease.
The loose screws inside the lock mechanism are another reason for a malfunctioning lock. They may loosen and fall out or break off completely and stop the lock from working properly. A screwdriver is a tool to tighten these screws but caution must be taken not to over-tighten them because this could damage the internal components.
A damaged lock could be dangerous for you and your family members especially if you have small children. They can open the door without knowing which gives them access to your house. If you are worried about this happening, then a vetted locksmith can provide a quick and efficient service to secure your double-glazed doors.
Misty Glaze are a professional uPVC and double glazing company in Lancing and can repair all kinds of damaged and damaged mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also alter the locking system on your uPVC windows or double glazing to meet your needs. This means that replacement doors and/or windows are not always required.
Handles that are broken or damaged
A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great option for those who are concerned about burglars who are opportunistic and trying to gain access to their home. Ask your locksmith about antilift blocks. They can be installed in addition to existing locks and can help keep your windows firmly shut.
It's not uncommon for the handle locks to become damaged or fail - they are the first part of your window that could be pushed open by a criminal intent on breaking into. Luckily, the good news is that this is among the easiest parts to fix.
Modern uPVC and aluminium handles have a multi-point locking mechanism called Espagnolette that is designed to resist forced entry. This security upgrade is available as an option on new uPVC windows. As an optional upgrade, older uPVC or aluminium handles that are no longer in use can be upgraded to a shoot bolt locking system.
If a handle is damaged, it is essential to get the handle repaired as quickly as you can. A damaged handle could prevent the window from closing properly and allow drafts to get in. It could also be a weak point that burglars who are opportunistic might exploit, putting your family and belongings at risk of theft.
The process of fixing the malfunctioning mechanism begins by opening the window frame and then removing the damaged handle. The gearbox is then opened to determine the kind of gearbox that is used to open the handle. This allows a replacement that matches the profile and internal window frame mechanisms.
After the mechanism has been replaced the handle can then be re-attached with the original screws - however, we generally recommend replacing them with larger ones because this will ensure a more secure fit. The final step is to seal the handle with an opaque sealant. This will help protect it from further deterioration. After that the window will be operational again, and at a fraction of the cost of replacing the entire window.
Broken or Faulty Hinges
If your windows don't shut properly, you could experience draughts, the weakening of your home's security barrier and a higher risk of damp or water damage. Broken or damaged window hinges are a common issue that can be fixed easily.
If your uPVC windows won't open or shut and close, it's likely the hinges need to be repaired or replaced. Most window companies will require you to buy a new window unit to resolve this issue, but we can replace the hinges to save you money.
Window hinges can often break due to repeated use or might be damaged through rust over time. If you find a damaged hinge, it is important to take measures to prevent further damage by taking care not to make the window swing open or closed.
The type of hinge you are looking for will help you locate the right parts to repair it. Maco, Mila and Roto are all manufacturers of window hinges. Talk to a professional before purchasing parts that will not fit into your existing hardware. This could cause more damage.
Faulty hinges are a major issue for uPVC windows and doors. They can be the main source of noise, and they can also permit water to infiltrate your windows.
Verify that the pin barrels on both hinge halves are aligned. If not then tap the headpin using a hammer in order to make a slight bend in the hinge barrel. This will help to keep the pin in the right position. Then, ask a friend to hold the door while you remove the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges using those that are of the same size, and install the screws with glue. Finally put the hinges in place using weights or clamps while the glue is drying.
Once the hinges have been fixed, you should be able to re-install the door and then reattach the handle. Replace the screws with wooden dowels of the same length as the original screw to ensure they are in line.
Broken or Faulty Glass
uPVC Windows can be damaged over time, even though they are extremely effective in keeping out the cold and keeping the heat. This can be the case with broken or damaged glass and faulty locks. This issue can be very expensive when left unattended. It can also affect the aesthetics of your home and result in a decrease in insulation. It is crucial to repair any damage promptly.
You can repair the crack in your glass yourself if you have the appropriate tools and techniques. Make sure the area around the broken glass is clear of debris, so that fragments don't cause injury or trip hazards. After that, take away the broken glass pieces and dispose of them in a appropriate way. Apply masking tape across the entire area. This will stop glass fragments from sticking to your skin and scattering when you move them. If you're dealing with a double-pane window, it's a good idea to prepare the glass before gluing it back into place so that you know you'll have enough room to complete the project.
Before applying the glue, wipe the surface of the damaged frame and the glass with a an unclean, dry cloth. Follow the curing and application directions that differ from product-to-product. Depending on the direction of the crack, you may need to secure the glass in place while it is curing. You can do this using lightweight clamps specifically designed to support fragile materials.
Once the adhesive is fully cured, carefully reinstall the glass in the window frame, ensuring it's flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be careful not to bend the window as it's being reinstalled, as this can weaken the seal and cause condensation and water infiltration.
If you have a glass door that's broken completely or has bigger cracks, contact a professional glazier like O'Brien(r) to organise a replacement. It's crucial to act fast if you have broken glass.